Contact Us
M-F 9am - 5pm ET
Request parts
Request Service
Products
1580
Total ItemsProducts
1580 Total Items
Sort
Cane Holder Kit (F/Fi)
by Whill (Model No. 24-14032-0)
- Compatible with Whill Model F/Fi
- Easily attaches and detaches
Free Shipping
Caster Wheel Assembly for Jazzy and Jet Power Chairs
by Pride (Model No. WHLASMB1112)
- Solid urethrane, flat-free caster wheel
- Pre-installed 608ZZ bearings and spacer
6" Gray Urethane Caster Wheel Assembly for Pronto Series Power Wheelchairs (PAIR)
by Invacare (Model No. 1122066)
Rear Basket, Large Square
by Pride (Model No. ACCBSKT1010)
- Large enough for grocery or shopping bags
- Can be used on most Pride scooters including the Go-Go, Revo, Victory, Celebrity, Legend, Maxima, Hurricane, Pursuit and Wrangler
MAX WEIGHT CAPACITY
up to 10 lbs.
Single Cane Holder, 3" Diameter for Pride Scooters
by Pride (Model No. ACCINDV1058)
Bring your cane with you as you ride!
- Attaches to rear universal accessory hitch
- Provides convenience
- Sold individually
MAX WEIGHT CAPACITY
up to 15 lbs.
24v 8amp Charger
by MK Battery (Model No. LS24/8A-08)
- Suitable for batteries from 45 AH to 80 AH
- Comes with an industry standard 08 round 3 pin plug
- Automatically shuts off when the batteries are fully charged
Jay J2 Replacement Cover
by Sunrise/ JAY (Model No. J2cover)
- Available in Strech, Air Exchange, and Moisture-Resistant
- Good for daily use and incontinence
- Moisture -Resistant and Stretch can come with a zipper
9"x3" Flat-Free Drive Wheel Assembly for Jazzy Select Elite
by Pride (Model No. WHLASMB2017)
Made to Fit:
- Jazzy Select Elite
- Jazzy Elite ES Portable
Walker Holder for Pride
by Pride (Model No. ACCASMB)
Bring your walker with you as you ride with this universal Pride accessory.
- Holds either a standard or rolling walker
- Attaches to the universal accessory holder on the back of every Pride Scooter
- Sold Individually
MAX WEIGHT CAPACITY
up to 15 lbs.
9" Black Flat-Free Rear Wheel Assembly for Go Go Elite Traveller Plus
by Pride (Model No. WHLASMB1835)
Made to Fit:Go Go Elite Traveller Plus
Hand Control for Single Motor Golden Technologies Lift Chairs
by Golden Technologies (Model No. ZK1200-HC)
The standard 2-button hand control for most Golden Technologies lift chairs, now with an attractive wood-grained finish.
- Compatible with most Golden Technologies 3-position chairs
- Easy, quick connect located in the side pocket
- Attractive wood-grain finish
Classic Style Anterior Trunk Support
by Jay (Model No. ATS810S/ATS830)
Comfortable design and a wide range of positioning support.
- Dynamic or structured construction
- Squeeze-release buckles
- Helps with head positioning and upper-extremity control
Comfort Arm Support
by Comfort Company (Model No. 200X)
Available in three lengths and provides support for contractures and tone.
- Three hardware mounting options
- Available in 14", 17" and 22" lengths
- Moldable option available in 22" length
PRODUCT WEIGHT
2.3 lbs.
LEGREST OPTIONS
Not Applicable
7" Black Flat-Free Front Wheel Assembly for Go Go Elite Traveller Scooters
by Pride (Model No. WHLASMB1841)
Made to Fit:Go Go Elite Traveller
Newton Grade Aid Wheelock
by Motion Composites (Model No. 900)
Low handle height for unobstructed side transfers.
- Safer to use
- Automatically disengages before your thumb gets hurt
- 30% weight saving
Cane Holder Kit (F/Fi)
by Whill (Model No. 24-14032-0)
- Compatible with Whill Model F/Fi
- Easily attaches and detaches
Free
Caster Wheel Assembly for Jazzy and Jet Power Chairs
by Pride (Model No. WHLASMB1112)
- Solid urethrane, flat-free caster wheel
- Pre-installed 608ZZ bearings and spacer
6" Gray Urethane Caster Wheel Assembly for Pronto Series Power Wheelchairs (PAIR)
by Invacare (Model No. 1122066)
Rear Basket, Large Square
by Pride (Model No. ACCBSKT1010)
- Large enough for grocery or shopping bags
- Can be used on most Pride scooters including the Go-Go, Revo, Victory, Celebrity, Legend, Maxima, Hurricane, Pursuit and Wrangler
MAX WEIGHT CAPACITY
up to 10 lbs.
Single Cane Holder, 3" Diameter for Pride Scooters
by Pride (Model No. ACCINDV1058)
Bring your cane with you as you ride!
- Attaches to rear universal accessory hitch
- Provides convenience
- Sold individually
MAX WEIGHT CAPACITY
up to 15 lbs.
24v 8amp Charger
by MK Battery (Model No. LS24/8A-08)
- Suitable for batteries from 45 AH to 80 AH
- Comes with an industry standard 08 round 3 pin plug
- Automatically shuts off when the batteries are fully charged
Jay J2 Replacement Cover
by Sunrise/ JAY (Model No. J2cover)
- Available in Strech, Air Exchange, and Moisture-Resistant
- Good for daily use and incontinence
- Moisture -Resistant and Stretch can come with a zipper
9"x3" Flat-Free Drive Wheel Assembly for Jazzy Select Elite
by Pride (Model No. WHLASMB2017)
Made to Fit:
- Jazzy Select Elite
- Jazzy Elite ES Portable
Walker Holder for Pride
by Pride (Model No. ACCASMB)
Bring your walker with you as you ride with this universal Pride accessory.
- Holds either a standard or rolling walker
- Attaches to the universal accessory holder on the back of every Pride Scooter
- Sold Individually
MAX WEIGHT CAPACITY
up to 15 lbs.
9" Black Flat-Free Rear Wheel Assembly for Go Go Elite Traveller Plus
by Pride (Model No. WHLASMB1835)
Made to Fit:Go Go Elite Traveller Plus
Hand Control for Single Motor Golden Technologies Lift Chairs
by Golden Technologies (Model No. ZK1200-HC)
The standard 2-button hand control for most Golden Technologies lift chairs, now with an attractive wood-grained finish.
- Compatible with most Golden Technologies 3-position chairs
- Easy, quick connect located in the side pocket
- Attractive wood-grain finish
Classic Style Anterior Trunk Support
by Jay (Model No. ATS810S/ATS830)
Comfortable design and a wide range of positioning support.
- Dynamic or structured construction
- Squeeze-release buckles
- Helps with head positioning and upper-extremity control
Comfort Arm Support
by Comfort Company (Model No. 200X)
Available in three lengths and provides support for contractures and tone.
- Three hardware mounting options
- Available in 14", 17" and 22" lengths
- Moldable option available in 22" length
PRODUCT WEIGHT
2.3 lbs.
LEGREST OPTIONS
Not Applicable
7" Black Flat-Free Front Wheel Assembly for Go Go Elite Traveller Scooters
by Pride (Model No. WHLASMB1841)
Made to Fit:Go Go Elite Traveller
Newton Grade Aid Wheelock
by Motion Composites (Model No. 900)
Low handle height for unobstructed side transfers.
- Safer to use
- Automatically disengages before your thumb gets hurt
- 30% weight saving
Quick
