The Top End Pro is a basketball player's dream chair. It features high performance sports wheels, high pressure clincher tires, quick release axles, adjustable height fixed swivel ant-tip with a 58mm fifth wheel and a smart fork caster system equipped with super hard 72mm front casters. This durable and attractive chair will stand up to whatever you throw at it with its fixed camber and fully welded aluminum base. Additionally, this chair has adjustable front seat height, center of gravity, back height/angle, back upholstery and footrest positioning: fore/aft, up/down, angle The chair adjusts in the blink of an eye, which is a nice change from the way other basketball chairs operate.

What Makes It Different

This chair is in a class of its own because it allows you to adjust it to your own unique specifications in just 15 minutes, instead of the up to 4 hours that it could take with other chairs. Combine this with an adjustable footrest that allows you to get into the game either with your feet out (and secured by the toe stop and strap) or tucked securely away, and you have a chair that always comes up as a winner.

Why We Like It

The Top End Pro is an overall excellent chair that has all that you need to succeed on the court. In addition to its sporty look, light weight and versatile options, this chair allows athletes to choose from both a tall and short frame, so no matter your size, this chair will work for you.

What You Need to Know When Ordering

This chair is customized to the selections that you make when ordering. Based on these selections, shipping time will vary.

Measuring Guide

View Detailed Measurement Guide

Seat Depth¹

Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.

Back Height²

Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.

Rear Seat to Floor³

Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.

Hanger Angle⁴

Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular.

Seat Width⁵

Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.

Wheel Camber⁶

Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.

Front Seat to Floor⁷

Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.

Footrest Width⁸

Measure from the inside of each legrest tubing the distance or desired distance between legrests.

Center of Gravity⁹

Measure from the front of the seat back post to the center of the rear axel.

Seat to Footrest Length¹⁰

Measure from the edge of the seat upholstery to the top rear of the footrest.

Backrest Angle¹¹

Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5" of dump.