Contact Us
M-F 9am - 5pm ET
Request parts
Request Service
Professional Evaluation Visit for Modular Ramp
Ramps that restore your independence by making raised landings accessible
Professional Evaluation Visit for Modular Ramp
Lifetime Limited Warranty
Price Match Guarantee
FREE Shipping
Features
- Measurement Visit for Modular Ramp
- Purchase cost of visit will be applied when you place the ramp order with SpinLife
- Includes Professional Installation with purchase of modular ramp
- 10ft - 24ft ramps with weight capacity up to 850lbs
- Ensures easy access for individuals using wheelchairs, walkers, or scooters
- Ramp sections can be easily disassembled and stored when not in use
- Equipped with a non-slip surface to provide traction and enhance safety
- Harmar modular ramps are engineered to support heavy loads
Key Specs
- Weight capacity: 850 lbs.
- Weight: 200 lbs.
Overview
Our Process
The Elevated Modular Ramps are custom measured to your raised landing inside or outside your home. Step one, purchase a professional measuring visit. We will send a technician out to your home to take measurements. This measurement determines what the slope of the ramp will be. An ADA-compliant ramp must have a flat landing at both the top and bottom of each run. Along with ADA requirements in the U.S. a modular ramp should have at lease 12" of length for every 1" of rise. Platforms are sometimes optional and sometimes required. Depending on the terrain, the feet may need foundation supports, such as a paver, to level your ramp. When a ramp must change directions, either to avoid an obstacle or to make sure the ramp fits within certain space restrictions, a flat platform must be used to facilitate the turn. This is why we recommend the professional measurement visit.
The modular ramps are portable and can be stored or transported and setup in different locations. Non-corrosive aluminum construction ensures your ramp will last for years to come.
After Your Measurement Visit What To Know When Ordering
Per ADA requirements in the U.S. a modular ramp should have at least be 12" of length for every 1" of rise. The rise refers to the distance between the bottom to the top of the stairs or ledge needing to be ramped. This measurement determines what the slope of the ramp will be.
Platforms are sometimes optional and sometimes required. When selecting a ramp with platform, we recommend a 4' x 4' platform for manual mobility equipment, and a 5' x 5' platform for powered mobility equipment.
Platforms are sometimes optional and sometimes required.
Check out Elevation Modular Ramps 10-16 Feet and Elevation Modular Ramps 17-24 Feet
*Note: If after the measuring is complete, there is no compatible ramp or you decide not to move forward with purchasing from SpinLife, the measuring fee is non-refundable. If you move forward with purchasing a modular ramp from SpinLife, the fee for measuring will be applied to the order.
More Information on the Professional Evaluation Visit for Modular Ramp
See also:
Return Policy
This item is non-returnable for one of the following reasons:
- This item is custom-made by the manufacturer to suit your specific needs . Please review all specifications carefully before placing your order.
- Once production of your custom item has begun – the order is unable to be cancelled.
- For hygienic safety and per FDA regulations this item is non-returnable, even if unused.
- Once products are installed, the product is no longer returnable.
- Items that are purchased as "Open-Box" are non-returnable.
- Please inspect your product upon delivery. If the product is damaged or is not the correct product, please refuse the delivery. If your item was delivered without a signature and is damaged or incorrect please call SpinLife Customer Service.
If you have questions about this item please call a SpinLife Expert at 1-800-850-0335.
Warranty Information
WARRANTY COVERAGE:
• Harmar Mobility warrants the Pinnacle SL600 series to be free of defects in material, mechanical in the motor, gearbox, rail, worm gear and gear rack for the lifetime of the product from the date of retail purchase.
• Harmar’s other parts and electrical components are warranted for three (3) years.
• Supplied batteries are limited to one (1) year from the date of retail purchase.
EXCLUSIONS
• Pinnacle SL600’s installed outdoors are not covered and are not approved for outdoor use.
• SL600’s installed in commercial buildings are not covered and are not approved for commercial use.
• This warranty does not cover maintenance or adjustments.
• Harmar will not be charged for labor, consequential damage, or repair expenses.
• Harmar will not be liable for the loss of the use of its products or loss of time.
• This warranty becomes null and void if the product has been lost, damaged by accident, over-stressed, misused and/or neglected, or if the product has been modified in any way.
Parts
Don't see the part you need? Let us find it for you.Fill out Form
More Information on the Professional Evaluation Visit for Modular Ramp
See also:
