The Invacare Tracer EX2 Deluxe wheelchair is a high quality standard wheelchair that offers options not available on any other standard weight chair that we carry, including a hemi seat-to-floor height, for those users who propel with their feet. Choose from desk length or full length arm rests and a full range of accessories. Standard features include 8" solid rubber casters, composite handrims, black vinyl upholstery, padded armpads and wheel locks. The frame is warranted for a lifetime.
*Tracer EX2 comes in a silver vein finish with black upholstery
Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.
Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.
Rear Seat to Floor3
Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.
Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular.
Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.
Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.
Front Seat to Floor7
Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.
Measure from the inside of each legrest tubing the distance or desired distance between legrests.
Center of Gravity9
Measure from the front of the seat back post to the center of the rear axel.
Seat to Footrest Length10
Measure from the edge of the seat upholstery to the top rear of the footrest.
Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5" of dump.
If you have a problem with your manual wheelchair, simply call one of our expert customer service representatives, and they will arrange for a diagnosis of your wheelchair.SpinLife.com will have the parts shipped to you – free of charge.Every effort will be made to return your manul wheelchair to working condition in the shortest time possible.
The following parts will be repaired or replaced at our discretion, free of charge, for the following allowable time periods from the date of purchase.
Side frame and cross members
13 months (1 year, and 1 month):
Upholstered materials and remaining components
All of the previous parts are covered for defect in material and/or workmanship.Any abuse or intentional misuse of the wheelchair will void the warranty.