Top End Terminator Titanium
(Model No. TEDTI)
- Invacare adjustable camber system - camber inserts 0 degrees, 3 degrees, 6 degrees, 9 degrees, 12 degrees, 15 degrees, 18 degrees, and 20 degrees.
- Available 24 inch, 25 inch, or 26 inch high performance wheels with hard anodized pushrims.
- Bead blast scratch-resistant finish or standard paint.
- Custom 3-2.5 seamless titanium frame.
- Tapered or V-style front frame.
- Frame Type: Rigid
- Weight capacity: 250 lbs.
- Starting Weight: 17 lbs.
- View All Specs
Manuals, Literature & Videos
Overview of the Top End Terminator Titanium
In the Invacare Top End Terminator Titianium wheelchair, you can have all the features and performance of the lightweight, Invacare Top End Terminator (TM) everyday. The same meticulous attention to detail and hand craftsmanship that goes into the construction of the medal-winning Invacare Top End Terminator sport wheelchairs can be found in this model designed for everyday use. If you know what you want and no longer need all those extra adjustments, this wheelchair's custom-built and tailored to your preferences.
Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.
Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.
Rear Seat to Floor3
Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.
Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular.
Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.
Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.
Front Seat to Floor7
Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.
Measure from the inside of each legrest tubing the distance or desired distance between legrests.
Center of Gravity9
Measure from the front of the seat back post to the center of the rear axel.
Seat to Footrest Length10
Measure from the edge of the seat upholstery to the top rear of the footrest.
Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5" of dump.
Specifications for the Top End Terminator Titanium
|Product Weight:||Complete chair from 15 pounds including wheels for a 15" wide by 15" deep chair with minimal options.|
|Product Weight Capacity:||250 pounds.|
|Frame Tubing:||3-2.5 seamless titanium in 1" or 3/4" diameter.|
|Seat Width:||12"-18" plus custom sizes in 1/2" increments.|
|Seat Depth:||14"-18" plus custom sizes in 1/2" increments.|
|Seat Height:||Front seat-to-floor height: 17"-21" Rear seat-to-floor height: 14.5"-21" Both seat heights available in custom dimensions in 1/2" increments.|
|Back Angle:||Back angle is adjustable on folding back. Four fixed back angles availble.|
|Back Options:||Adjustable tension upholstery by hook and loop is standard: center with R/L flaps. Foldover and adjustable tension by straps optional. Integral push handles or bolt-on push handles are available.|
|Wheels:||24", 25", 26' and 700C wheels are quick release, high performance radial spoked with double wall rims and high flange hubs equipped with high pressure clincher tires and hard anodized aluminum pushrims. Optional Spinergy Spox wheels available in black or yellow spokes. 1 3/8" grey treaded, knobby and Kik tires are also available.|
|Wheel and Caster Size:||Rear wheels: 22", 24", 25", 26", 700C Front semi-pnuematic caster: 3", 4", 5" or 6" Softroll aluminum caster is optional.|
|Camber Angle:||Camber bar 2000 is single camber available in cambers of 0-20 degrees. A4 adjustable camber is also available as a no charge option with choice of two cambers: 0, 3, 6, 9 & 12 degrees.|
|Footrest:||One piece tubular footrest or adjustable angle one piece footplate available. Carbon fiber or plastic footrest cover optional.|
|Arm Style:||Swingaway or padded adjustable height T-arm with sideguard available as options. Arm accessories include: removable side guards, removable cloth side guards with rigidizer, fixed aluminum or carbon fiber side guards, folding aluminum side guards and removable side guards with fender.|
|Caster Suspension Options:||New rear Shock Stopper Suspension and Frog Leg front suspension casters add only 1 pound of total weight to the chair.|
|Warranty:||Lifetime frame, one year parts.|
Approximate Shipping Dimensions and Weights
|Product Weight:||17 lbs.|
|Shipping Weight:||43.00 lbs.|
Warranty Information for the Top End Terminator Titanium
Invacare warrants the frame to be free from defects in materials and workmanship for the original purchaser for three (3) years from the date of purchase.
All components including, but not limited to camber tubes, caster forks, armrests and upholstery are warranted against defects in materials and workmanship for a period of one (1) year from the date of purchase except push handle grips, bushings, bearings and tires/tubes.
If within such warranty period any such product shall be proven to be defective, such product will be repaired or replaced, at Invacare's option. This warranty does not include any labor or shipping charges incurred in replacement part installation or repair of any such product. Invacare's sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/or replacement.
SpinLife Return Policy for the Top End Terminator TitaniumThis item is custom-made by the manufacturer to suit your specific needs and is therefore non-returnable.
If you have questions about this item please call a SpinLife Expert at 1-800-850-0335.
Customize & Buy