- The details of a TiLite available in 1.25" mono-tube aluminum
- TiLite Tru-Fit system makes changing the center of gravity quick and easy
- Highly customized for your fit and style at a great price
- Quick-Release Axles: Yes
- Weight capacity: 250 lbs.
- Starting Weight: 13.2 lbs.
- View All Specs
Manuals, Literature & Videos for the Aero Z Series 1
Overview of the Aero Z Series 1
The TiLite Aero Z Series 1 brings the superior level of performance, customization and style you have come to expect from TiLite to an aluminum chair. Innovative technology and design from the TiLite titanium line have been applied to the Aero Z. The results are revolutionary style in a completely custom made, ultra lightweight aluminum chair. From components like TiLite's trademark soft roll casters to seat widths and center of gravity choices. The Aero Z offers a wide array of options that create a better fit and performance for the user.
* Starting weights shown are provided by the manufacturer. Weights stated are for a 16” x 16” chair frame with standard, no-charge options. Increasing the frame size of the wheelchair and/or adding options such as armrests, push handles, swing-away footrests, flat-free inserts, etc. can significantly increase the finished weight of the wheelchair.
View Detailed Measurement Guide
- Seat Depth1
- Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.
- Back Height2
- Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.
- Rear Seat to Floor3
- Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.
- Hanger Angle4
- Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular.
- Seat Width5
- Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.
- Wheel Camber6
- Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.
- Front Seat to Floor7
- Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.
- Footrest Width8
- Measure from the inside of each legrest tubing the distance or desired distance between legrests.
- Center of Gravity9
- Measure from the front of the seat back post to the center of the rear axel.
- Seat to Footrest Length10
- Measure from the edge of the seat upholstery to the top rear of the footrest.
- Backrest Angle11
- Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5" of dump.
More Information on the Aero Z Series 1