MVP-502 Ergonomic

Manuals, Literature & Videos for the MVP-502 Ergonomic

• Owner's Manual
• Product Brochure

Overview of the MVP-502 Ergonomic

The MVP Premium Ergonomic Recliner is the only chair of its kind in the reclining wheelchair category. This is a high quality ergonomic recliner that features both comfort and durability. This chair's cushions conform to your body, are breathable and vary in thickness from 1.25" to 3".  In order to prevent sliding and soreness, this chair's backrest reclines smoothly from 93-160 degrees while the leg rests move in four directions for utmost ease. It comes standard with Strap-Tension adjustable backrest & seat and folds into an ultra-compact size for maximum portability, and will fit easily into a smaller sedan for transport. 

What Makes This Different

This wheelchair is unique as the back of the chair collapses easily, which is not often seen in this category of recliners. This feature makes the chair extremely portable. Also, the patented "V-Seating" helps to prevent sliding when the chair is reclined. Also, this chair comes in a transport version with 14" rear wheels, or a standard version with 22" rear wheels.

Why We Like It

Finally, an ergonomic recliner that is also extremely portable! The MVP Ergonomic Recliner is the perfect option  that offers the most amount of customization, comfort and easy transport. Spin Life offers this chair as a premium choice to those looking for a reclining chair that has all the features you could want.  This recliner chair offers the best of both worlds with all the options one desires in an attractive recliner chair along and a personalized fit, all tied up in a compact and portable package.

What You Need to Know When Ordering

Ships from the warehouse in approximately 3-5 business days and will arrive within in 6-8 business days. 

Measuring Guide

View Detailed Measurement Guide

Seat Depth¹

Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.

Back Height²

Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.

Rear Seat to Floor³

Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.

Hanger Angle⁴

Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular.

Seat Width⁵

Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.

Wheel Camber⁶

Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.

Front Seat to Floor⁷

Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.

Footrest Width⁸

Measure from the inside of each legrest tubing the distance or desired distance between legrests.

Center of Gravity⁹

Measure from the front of the seat back post to the center of the rear axel.

Seat to Footrest Length¹⁰

Measure from the edge of the seat upholstery to the top rear of the footrest.

Backrest Angle¹¹

Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5" of dump.

More Information on the MVP-502 Ergonomic

• See also:
• Details & Specs
• Reviews
• Warranty
• Returns