Dynaform Ankle Positioner

Overview of the Dynaform Ankle Positioner

The Dynaform Ankle Positioner is designed to provide stability while allowing flexibility and the ability to rotate your foot. The three-point ankle strap attachment forms a cup around the heel and the contoured side-release straps hold the ankle in position. The foot is protected by a rigid footplate and the adjustable straps allow you to use the positioner with most footwear.

What To Know When Ordering:
The Dynaform Ankle Positioner is sold by the each. You must indicate what side (left or right) is needed when ordering.

The Small size positioner is for foot base measurements of 7 1/2" L x 4 1/2"  W. 
The Medium size ankle positioner is for foot base measurements of 9" L x  5" W.
The Large size ankle positioner is for foot base measurements of 10" L x  5 1/2" W.

Given the complexity of advanced positioning systems, we encourage you to call our experienced product specialists at 1-800-850-0335 for assistance when selecting these items.

Measuring Guide

View Detailed Measurement Guide

Seat Depth¹

Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.

Back Height²

Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.

Rear Seat to Floor³

Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.

Hanger Angle⁴

Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular.

Seat Width⁵

Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.

Wheel Camber⁶

Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.

Front Seat to Floor⁷

Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.

Footrest Width⁸

Measure from the inside of each legrest tubing the distance or desired distance between legrests.

Center of Gravity⁹

Measure from the front of the seat back post to the center of the rear axel.

Seat to Footrest Length¹⁰

Measure from the edge of the seat upholstery to the top rear of the footrest.

Backrest Angle¹¹

Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5" of dump.

More Information on the Dynaform Ankle Positioner

• See also:
• Details & Specs
• Warranty
• Returns