On orders over $50.
No code. No hassle.
The Invacare Top End Force G provides excellent performance due to its aerodynamic design. It features an adjustable, trunk-powered, erect position for low paras, amputees, and competitors who can “gut” it out using abdominal, arm, shoulder and chest muscles. The center frame construction has an internal rib which reinforces the frame making it super stiff for maximum transfer of power. The Force G’s center frame design also allows for transfers that are easier than any other handycles in its class. Control through the turns is smooth yet fast with the Top End steering dampener system. The 27 speeds operated by the Rapid fire hands-on shifter/ brake delivers smooth, responsive shifting and braking right at your fingertips plus the easy-to-operate, no cable, virtually maintenance-free manual upper derailleur system take the guess work out of the chain rings.
Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Optimal contact between the legs and the seat increases stability for the body.
Measured from the seat base to the top of the chair back. Sport users need enough height for upper body support, yet low enough to allow the arms and trunk to rotate freely.
Rear Seat to Floor3
Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the seat. Sport chairs usually have more dump for extra upper body stability.
Determines how far the toes extend away from the body, measured from the horizontal. Sport users often use very tight angles to be able to rotate in the smallest possible space.
Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Sport chairs are typically as narrow as possible to save weight which improves agility.
Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical sport chair uses nine to twelve degrees of camber.
Front Seat to Floor7
Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the chair will be foot-propelled.
|Find a sport chair|
|Seat to Floor Heights:||8"|
|Hemi Height Option:||No|
|Fold-down back for easy transport:||No|
|Reclining Back Option:||No|
|One-Arm Drive Option:||No|
|Expedited Shipping Available:||Yes|
|Product Weight:||32 lbs.|
|Shipping Weight:||40.00 lbs.|