Weight Capacity:	250 lbs.
Frame Weight(excluding rear wheels)::	12.9 lbs.
Seat widths:	Choose 12" to 20" in 1" increments.
Seat depths:	Choose 12" to 20" in 1" increments.
Front Seat Height:	Choose 15" to 21" in 1/2" increments.
Rear Seat Height:	Choose 12" to 20" in 1/2" increments.
Camber:	Choose 0, 2, 4, 6, 8, 12, 15, 18 degree.
Frame construction:	Rigid
Frame type:	Ultra lightweight
Warranty:	Lifetime Limited
Front frame angle:	70, 80, or 85

Seat Depth1 Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg. Back Height2 Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate. Rear Seat to Floor3 Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat. Hanger Angle4 Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular. Seat Width5 Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant. Wheel Camber6 Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber. Front Seat to Floor7 Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.

Find a manual wheelchair

A. FRAME – LIFETIME

TiLite warrants the wheelchair frame (including the cross-braces, if any) against defects in materials andworkmanship for the lifetime of the original user of the wheelchair. The expected life of the frame is five years.TiLite warrants all TiLite–made wheelchair components (including, but not limited to, armrest assemblies, backrest, assemblies, footrest assemblies, camber tubes and plugs and caster forks) against defects in materials and workmanship for one (1) year from the date of purchase, except as provided below.

C. LIMITATIONS AND EXCLUSIONS

This warranty does not cover:



a. tires and tubes for front or rear wheels, upholstery (including cushions, seat slings, backrest upholsteryand armrest upholstery), or push-handle or stroller handle grips; or

b.

damage arising from normal wear and tear or from other circumstances beyond TiLite’s control; or

c.

any labor or shipping charges incurred in replacement part installation or repair of this product; or

d.

TiLite Designs Unlimited frames and frame components, unless TiLite, in its sole discretion, determines that the Designs Unlimited frame or frame component was defectively manufactured.

 

This warranty is VOID if TiLite, in its sole discretion, determines that:

a.

the original TiLite serial number tag has been removed, altered or defaced; or

b.

the wheelchair has been subjected to negligence, accident, improper maintenance, storage or operationas required by your TiLite Owners Manual, commercial or institutional use, misuse or abuse, including,but not limited to, exceeding the maximum weight limit of 250 pounds or using the wheelchair with tie downs or locking, clamping or other restraint systems related to the use of the wheelchair in a motor vehicle; or

c.

the wheelchair has been damaged by improper repairs or repairs made to any component without the express written consent of TiLite; or

d.

the wheelchair has been modified without TiLite’s express written consent, including, but not limited to, modification through the use of unauthorized parts or attachments.

 

This warranty applies only to the original intended user of the wheelchair.

D. OUR RESPONSIBILITY

TiLite’s sole responsibility is to repair or replace, in our sole discretion, the covered components of the wheelchair.

E. FOR WARRANTY SERVICE

Contact a customer service representative from Spinlife.com

 

 

B. COMPONENTS – ONE (1) YEAR