39102116
 

MG
by Invacare (Model No. MG)

Share to Twitter Share to Facebook Email Page Print Page

Discontinued

The product that you were searching for is either discontinued by the manufacturer, or no longer available at SpinLife.com.
To find a comparable product at SpinLife.com please click here or call our product professionals at 800-850-0335.

Features

  • Chair comes standard with; 8"x1" Solid Rubber/Dk Grey Casters, 24" Composite Wheel/Urethane Tire & Composite Handrims.
  • Durable, low-maintenance, triple chrome plated carbon-steel frame.
  • 16 gauge crossbraces add strength and durability.
  • Urethane rear tires, mounted on a "No Flex" wheel, offer superior performance.
  • No-maintenance, dual-sealed precision bearings.
  • Heavy-duty inner liners keep seats and backs from stretching.
  • Flame-retardant upholstery resists mildew and bacteria, as well as cold-crack and UV damage.
  • Upholstery is dual embossed.

Key Specs



Overview of the MG

The perfect combination of both quality and economy, the Invacare MG isn't your average entry-level manual wheelchair. The MG has options that are interchangeable with the Tracer series, and it's backed with a three-year warranty. All this guarantees that the Invacare MG won't let you down when it comes to durability or cost.

  • Wheelchair shown with options that are available at an additional cost.


  • Measuring Guide

    View Detailed Measurements
     
     
    Seat Depth1
    Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.

    Back Height2
    Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.

    Rear Seat to Floor3
    Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.

    Hanger Angle4
    Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular.

    Seat Width5
    Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.

    Wheel Camber6
    Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.

    Front Seat to Floor7
    Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.

    Footrest Width8
    Measure from the inside of each legrest tubing the distance or desired distance between legrests.

    Center of Gravity9
    Measure from the front of the seat back post to the center of the rear axel.

    Seat to Footrest Length10
    Measure from the edge of the seat upholstery to the top rear of the footrest.

    Backrest Angle11
    Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5" of dump.

    More Information on the MG

    Specifications for the MG

    Approximate Shipping Dimensions and Weights

    Product Weight: 44 lbs.

    More Information on the MG

    SpinLife Return Policy for the MG

    This item is covered by the SpinLife "Best on the Web" 30-Day Return Policy.

    As stated in the full Return Policy, this item may be returned within 30 days of receipt for a full refund as long as the following conditions are met:

    • The item must be returned at the customer’s expense in the original packaging.
    • The item must be in new condition--no cracks, scratches or dirty tires.
    • A Return Authorization must be requested from SpinLife within 30 days of delivery.
    • Once the Return Authorization has been received from SpinLife, the product must be returned within 14 days to receive a refund.


    If you have questions about this item please call a SpinLife Expert at 1-800-850-0335.

    More Information on the MG

    Discontinued

    Discontinued

    The product that you were searching for is either discontinued by the manufacturer, or no longer available at SpinLife.com.
    To find a comparable product at SpinLife.com please click here or call our product professionals at 800-850-0335.