On orders over $50.
No code. No hassle.
The Colours Hammer ultra lightweight wheelchair rewrites the rules regarding rigid wheelchair frame design. From its large aluminum tubing to the wide Hammer head front design, the Hammer is a great choice for contact sports. And one that can be designed for your specific needs.
Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Optimal contact between the legs and the seat increases stability for the body.
Measured from the seat base to the top of the chair back. Sport users need enough height for upper body support, yet low enough to allow the arms and trunk to rotate freely.
Rear Seat to Floor3
Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the seat. Sport chairs usually have more dump for extra upper body stability.
Determines how far the toes extend away from the body, measured from the horizontal. Sport users often use very tight angles to be able to rotate in the smallest possible space.
Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Sport chairs are typically as narrow as possible to save weight which improves agility.
Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical sport chair uses nine to twelve degrees of camber.
Front Seat to Floor7
Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the chair will be foot-propelled.
|Find a sport chair|
|Seat to Floor Heights:||15.5" to 21"|
|Hemi Height Option:||Yes|
|Fold-down back for easy transport:||Yes|
|Reclining Back Option:||No|
|Rear Wheel Size:||
|Camber Angle:||8 ° to 20 °|
|Pneumatic (air-filled) tire option:||Yes|
|One-Arm Drive Option:||No|
|Armrest Options:||Fixed Height|
|Expedited Shipping Available:||Yes|
|Product Weight:||21 lbs.|
|Shipping Weight:||30.00 lbs.|
Colours warrants all rigid hardware (welded parts, machined mounts and brackets) for the lifetime of the originally registered owner. In the event an item is discontinued, it is the owners responsibility to replace or change the rigid hardware.
The front wheels and rear tires are warranted against defects and workmanship for a period of ninety (90) days from the day of delivery.
Other parts and equipment are warranted for a period of one (1) year from the day of delivery, against defects in material and workmanship.
Colours will have the right, on all claims, to require that all parts be shipped, prepaid to Colours, by the claimant, for replacement or repair. In the event that the parts are found to be defective, Colours will determine whether the parts will be replaced, repaired or if a credit shall be issued. This warranty does not include costs for transportation, shipping or labor for removal or reinstallation. Colours will invoice for any expenses incurred if it is determined that the part or parts are found not to be defective or otherwise not found to be defective under the terms of this warranty.
Not withstanding the above limited warranty, Colours will have no liability whatsoever, if any defect in a product is found to have resulted from improper storage, use, or service of the component. If Colours opinion is that any components have been installed incorrectly, misused or stored improperly, no warranty obligation will be available to the claimant.
Colours does not warrant the merchantablility or fitness for any particular purpose of its components and does not make any warranty, express or implied, other than the limited warranty contained herein. In the event a warranty issue arises, Colours advises you to first contact your authorized Colours dealer, to provide available solutions to the problem. This warranty is valid only for the originally registered owner.
Except where prohibited by law, this limited warranty represents the total agreement between you and Colours for any liability that may arise from a Colours manufactured component.